Informazioni dettagliate |
|||
Indice di rappresentazione di colore (Ra): | 80 | Servizio delle soluzioni di illuminazione: | Illuminazione e progettazione dei circuiti |
---|---|---|---|
Durata della vita (ore): | 6000 | Orario di lavoro (ore): | 20000 |
Tipo: | IP20 | Wattaggio: | 0.8W |
Temperatura di lavoro (℃): | -20 - 40 | Temperatura del colore (il TDC): | bianco fresco |
Flusso luminoso della lampada (lm): | 40 | Efficienza luminosa della lampada (lm/w): | 0,8 |
Vita di lavoro (ora): | 5000 | Angolo d'apertura (°): | 120 |
Garanzia (anno): | 3 | Tensione in ingresso (V): | 5v |
Istruzione Autodidattica (Ra>): | 6000K | Valutazione del IP: | IP44 |
Applicazione: | CASA, guardaroba, scale, gabinetto, cucina | Regolatore della luminosità di sostegno: | Nessun |
Marca del chip del LED: | N | Nome di prodotto: | La notte ha condotto PIR Motion Sensor Light |
Colore: | bianco bianco/caldo fresco | Vendita delle unità: | Singolo oggetto |
Singolo size  del pacchetto;: | 30X5X5 cm | Singolo peso lordo: | 0,200 chilogrammi |
Tipo del pacchetto: | Scatola dei colori |
Descrizione di prodotto
Specifications:
Voltage: DC5V
Power: 0.8W / LEDs
Luminous Flux: 100lm (+/- 10%)
Material: ABS+PC
Light Source: LED
LED Quantity: 12
Light Color: Warm White
Induction Mode: PIR sensor
Sensing Distance: 3-5m/9.8-16.4ft
Sensing Angle: 110 degrees
Delay Time: about 20 seconds
Switches: ON/AUTO/OFF
Battery Capacity: 450mA polymer lithium battery
USB Cable Length: 23.5cm
Lamp Size: 22*2.8*2cm
Lamp bracket Size: 18.9*2.2*1.6cm
Package Size: 4*3.6*29.5cm
Net Weight: 108.6g(each)
Package Weight: 138g(each)
Light Modes: ON/AUTO/OFF
On: solid light
Auto: light on automatically when human body is detected in the dark places within a detection range of 3-5 meters and light off automatically after 20 seconds when no motion detected.
Install Instruction:
Method One:
Step 1st: Place the plastic hook on the slot of the bracket and pull it downward for fixing (each hook holds an article within 1kg).
Step 2nd: Tear off the adhesive tape and attach it to the lamp bracket (if you don’t want to use the adhesive tape, you can fix the bracket to the wall with screws).
Step 3rd: Place the lamp bracket in desired place.
Step 4th: Fix the lamp body onto the lamp bracket.
Method Two:
Hang the lamp with the side hook and fix with a screw.
Package Including
Package Content:
2 x PIR Sensor Light
2 x Light Bracket
2 x Double-sided Adhesive Tape
1 x User Manual
2 x USB Cable(adapter not included)
2 set of accessories
Entri nel vostro messaggio